MODEL LR-F2812DAQ8x8
Complete Product Information
Scroll down for additional images
The Link Research model LR-F2812DAQ8x8 is a piggyback board designed to function with the model LR-F2812DAQ. It increases the number of A/D and D/A channels to a maxumum of 16 each. This board must be used with the model LR-F2812DAQ and the eZdsp™ development system from Spectrum Digital, Inc™. It cannot be used alone. This board has a 3 conductor pigtail connector, intended to be plugged into the F2812DAQ board. This allows for only one +/- 15V analog power supply to be used for both boards (see images below).
This product is not compatible with the F28335 eZdsp board. Please see our model LR-F28335DAQ8x8 for use with the F28335 eZdsp development system.
|
|
| Applications |
-
3 Phase power supply designs
-
3 Phase power inverter designs
-
Line power monitoring
-
Power factor correction control
-
Motor control
|
|
|
Ordering information:
| Model Number |
Description |
| LR-F2812DAQ8x8 |
This board contains 8 14-bit A/D Channels, 8 14-bit D/A channels. It must be used along with the model LR-F2812DAQ and the F2812 eZdsp development system. |
Additional Images
Click image to enlarge |
Click image to enlarge |
|
This image shows both the model LR-F2812DAQ and the LR-F2812DAQ8x8 daughtercards stacked up and plugged into the F2812 eZdsp board. This configuration results in a maximum of 16 A/D and 16 D/A channels. All 16 A/D channels can be sampled simultaneously, and all 16 D/A channels can be updated simultaneously.
Notice the analog power pigtail on the right. This allows a single ±15V analog power supply to provide power to both daughtercards.
|
This is an edge view of the above left image. The bottom board is the F2812 eZdsp board. The next board up is the model LR-F2812DAQ8x8, which contains 8 A/D and 8 D/A channels. The top board is the model LR-F2812DAQ, populated with 8 A/D and 8 D/A channels, along with other peripherals like an RS-232 serial port, 2 user LEDs, 8 digital inputs, etc. |
