>>> Scroll down for a list of excellent sources for surface mount (SMT) adapters <<<
Product Description
NOTE: All of our DaVinci prototyping boards include all 7 male Samtec connectors installed on the back side of the board
The model LR-DAVPROTO1-S is a general purpose, stackable prototyping board designed to mate with the Texas Instruments' TMDSEVM6446 DaVinci development board. The board is 9"x5.75", providing a generous area for custom prototyping work. An array of holes (0.035" diameter) on 0.1" spacing will accomodate thru-hole devices, as well as SMT adapters from companies such as Aries, Ironwood, etc. Between the gridded holes are buss traces with holes every half-inch or so. These holes fall in between the gridded holes, so as not to disrupt the continuous grid of 0.1" spaced holes.
The ability to stack an additional board on top of this board allows multi-board prototype systems to be developed.
At the ends of the busses are white writing pads, which can be used for buss labeling. A fine-point Sharpie pen is included with each prototype board.
Additional Images
|
The following sources of surface mount (SMT) adapters
are recommended for use with our prototyping boards
If you would like us to locate SMT adapters for your specific project,
please feel free to contact us and we will be happy to help!
|
|
Capital Advanced Technologies, Inc.
A great source for surface mount adapters,
including their popular surfboard devices.
Adapters are available for virtually any
SMT IC or discrete device in existance!
Capital Advanced Technologies also offers
"Master Kits", which contain one or more of
each adapter in a specific series. These kits
are handy to have in any electronic lab.
|
Typical products:
 
 
|
|
Aries Electronics, Inc.
A source for a variety of IC adapters and their popular "Correct-A-Chip" series.
|
Typical products:
 
 
|
|
Bellin Dynamic Systems, Inc.
An excellent source for adapters of all kind. Offered as break-off PC boards (as shown to the right)
|
Typical products:
|
